Write python script to automatically configure router
Check which port the serial cable is plugged into = USB Serial Port
Device Manager or Win+R, devmgmt.msc, Ports, (COM3)
wipe startup config
do erase startup-config
restart
do reload
Would you like to enter the intitial configuration dialog- NO
view version
do show version¶
enable privlaged exec mode
enable
open global settings
configure terminal
(configure)#
assign hostname
hostname (name) (HackBot1337)¶
show summary of interfaces
do show ip interface brief¶
show interface types
interface ?¶
interface FastEthernet 0/1 = LAN
setup interface FastEthernet 0/1
interface FastEthernet 0/1¶
ip address 192.168.1.1 255.255.255.0¶
bring up FastEthernet port 0/1
interface FastEthernet 0/1¶
ip nat inside¶
no shutdown¶
FastEthenet 0/0 = WAN
setup interface FastEthernet 0/0
ip address dhcp¶
set default gateway
ip default-gateway 192.168.0.1¶
save start up configuration
copy running configuration / copy run config¶
Disable on screen error commands
no logging console¶
Enable on screen error commands